Eugene Gorbunoff 
2006-05-15 20:24:41 | New version of the driver:
[url]
|
Eugene Gorbunoff
2006-09-09 01:56:02 | Edit parameters of network adapter:
(C:\IBMCOM\PROTOCOL.INI)
<PRE>
TXQUEUE = 8
RXQUEUE = 16
TXEARLY = 1536
TXMXDMA = 0
RXEARLY = 0
RXMXDMA = 256
PCIMRW = "yes"
RXAEP = "NO"
RXARP = "NO"
RXAIPEP = "NO"
RXATCPEP = "NO"
RXAUDPEP = "NO"
PWMDIS = "NO"
</PRE>
|
Eugene Gorbunoff
2006-11-27 15:15:51 | ^ This is suitable for 8168, section [rtgnda_nif]
btw, Select accept irq level >15 = ON if running ACPI.PSD in APIC mode on multiprocessor desktop or notebook.
|
Eugene Gorbunoff
2006-12-30 15:13:33 |
[url] |
Eugene Gorbunoff
2007-03-27 17:23:17 | 20061229 -- [url]
|
Eugene Gorbunoff
2007-03-31 12:52:05 | If you have troubles with 8168, read more -- [url]
|
Eugene Gorbunoff
2007-08-28 11:38:06 | If using APIC SMP then
IRQ15OVR = "YES" |
Eugene Gorbunoff
2007-09-26 13:42:14 | 8168 in notebook:
* shutdown windows xp before booting to eCS. (if suspend then 8168 may not work)
* always use working cable |
Andreas Buchinger 
2008-02-24 12:29:21 | From what I read, I got the impression, this driver works with eCS. But on os2ddprog Eugene aswered me - 'We have spent many monthes for testing. Conclusion: this driver is unusable'.
So I think I should repeat this statement here to help others to not spend unneccessary time in finding out itself. |
Doug Bissett 
2008-12-22 19:10:58 | My Asus M3A78-EM motherboard has an 8168 NIC built in. It works well, with the driver supplied by GENMAC 2.2. |
Martin
2009-01-01 06:43:52 | Asus M3A78-EM works also fine with rtgnda13 driver. Nice transfer rates are possible (around 30MByte/s and more, with U320 SCSI HD or fast SATA HD) The LAN Chip is labelled RTL8111CP.
The same chip on Asrock A780GXE/128M
Mainboard does not work :-((
The driver loads, DHCP request is sometimes successful, but no reliable connection ... |
Einar Lygre
2009-01-11 05:31:21 | MSI P45 Neo-F motherboard with RTL8168 built in.
eCS 2.0 rc6
Does not work at all either with Genmac driver or rtgnda13.
Both drivers load, but no connection |
Einar Lygre
2009-01-12 22:58:12 | To correct myself: the NIC is a RTL8168C. |
Eugene Gorbunoff
2010-07-12 14:29:40 | Igor Vaskov
[url]
[url]
Заходим в MPTS и удаляем драйвер GenMac. Далее c нашего сайта качаем драйвер rtgnda. Он ничем не отличается от идущего в комплекте с сиcтемой, кроме файла rtgnda.inf. В файле открыта дополнительная секция, позволяющая внести NETADDRESS.
Обратите внимание, что в параметрах драйвера нужно обязательно указать в параметре NETADDRESS MAC-адрес. Иначе сеть работать не будет! Можно посмотреть MAC адрес в логах GenMac, если он его определил, или внести этот 004835E70AAD, поменяв ему пару цифр для надежности. Также параметр TXCOMPINT можно установить в YES. Это снизит наргузку на процессор и повысит скорость работы сети.
|
eCo Software создала несколько сайтов:
