(Этот отчет составлен скаутом сайта ecomstation.ru), источник информации:
In the last time, there are no success-stories about an installation of ecs on modern _desktop_ hardware. It looks like ecs doesn't run on this hardware anymore, but this is wrong.
Last week I took an Haswell-CPU (actual generation of socket 1150) together with an typical uefi-miniATX-board, 4GB of DDR3-RAM and start up ecs 2.2 beta 2.
It works! Even the installer works with more than 512MB. And everything works out-of-the-box.
To be precise:
- CPU: intel i3-4xxx Haswell-CPU
- RAM: one 4GB-DDR3 module
- Mainboard: biostar H81MHP
it uses the actual intel chipset H81
supported by actual intel 1150-socket CPUs
ALC892 sound (HDA compatible), real parallel and one real serial COM-port (on onboard-pinheader, but useable), old fashioned PCI-Slots and two PS/2-Ports for older accessories.
The USB3-Ports are not supported but USB2 works even on the ecs-beta-DVD for mouse, keyboard and memorystick (reading ecs.key).
The SATA3-Ports are used in SATA2-mode so you have 4 SATA-Ports.
Unfortunately no IDE port and most sata-to-ide-adapter doenst work with DVD-ROM drives.
It offers RTL 8111 gigabit network, but I wasn't able to get a connection by this chip. So I put a cheap $10 RTL 8169-Card into the board and got network running.
I believe this could be said about other actual boards, but no one mention it. Thinking back to my expierence about former ecs-versions and any combination of uefi-boards, this is a very good sign.
This board is sold in EU, but at Newegg, there is a similar build board: Biostar H81MHP2 (lacks DVI and one PCI-slot, but offers LPT and COM-port at the outside), but there seems to be one one sells this down under (NZ+AU). For those who stick more with Asus or Gigabyte: similar build boards are out there too!
Информацию прислал: eComStation.RU Scout -- 2014-06-14 03:42:04